Competent is little in life as pulchritudinous as the beauty of a fully outfitted, custom made saltwater aquarium and the aquatic residents that make it their home. The process of purchasing an aquarium is an easy one for many – after all, there are so many choice for the decorating of such a thing that they seem to be partly endless – but the process for establishing maximum utility and making the aquarium livable for its new residents is a bit more complicated.
The first thing that needs to be done coterminous the purchase of a new aquarium is to cleanse the tank itself and all of its accessory parts with freshwater, sans soap, and a soft cloth. This will remove any dust and chemicals which existing may have accumulated while in the factory and prevent them from harming the fish. Once all of the parts obtain been cleaned the tank should be set upon a level stand which has been placed an appropriate distance from the wall to enable the electrical cords to reach an outlet plug with a minimal risk of minor amounts of sloshing from the tank causing an electrical fire. A soft cloth should be placed under the tank to keep the condensation from the saltwater aquarium from causing nullify to the surface of the stand beneath it.
Once the aquarium has been properly installed it should be filled with saltwater. You can either purchase an already made saltwater solution or make your acquiesce. Once you have filled the tank you should lease all of the device run for 24 to 48 on a test cycle to ensure that everything is working properly. Take this opportunity to test the temperature, salinity and pH of the water to ensure that the conditions are optimal for the breed of saltwater fish which are animation to be inhabiting your aquarium ( it is best to research this ahead of time – not integrated saltwater fish thrive in the same conditions ).
At this prong you boundness now do your landscaping. Remove approximately one half of the water and decorate your aquarium with whatever landscaping tools you choose ( rocks, plants, etc. ). It is important to first remove the water in order to cause the landscaping easier and to prevent spillage. Once you are finished, replace the water up to the fill livelihood ( if the tank does not come with a fill line you can use a permanent marker to make your own on the side facing the wall ).
It is decisive that the tank go through an initial 30 day cycling process, either with or without live fish, during which you are going to want to keep a very close eye on the ammonia levels of the water. During this time do not use an ammonia reducer, as this will simply force the process to start all over again. Once all of these steps hold been completed you are ready to add your fish, sit back and enjoy your new, custom made saltwater aquarium!
Leave a Reply